Application
● The P75 thruster is designed for underwater robots, surface vessels and subsea equipment. It has the characteristics of fast disassembly without screws, And you can choose a detachable Weed Guard, the propeller and weed guard can be replaced without removing the mounting screws. l
● The thruster is an open-water construction, and the materials selected are suitable for Marine use. The low cost design allows for quick replacement without maintenance. For the best efficiency under different voltage platforms, different models are provided.
●The P75 thruster with built-in ESC can save the space for placing the drive in the enclosure. The ESC of P75 can also achieve better heat dissipation when immersed in water. The ESC supports PWM cw and ccw contro
 | Different voltage platform selection |
| Interchangeable with T200, same mounting size and similar volume |
| Large thrust and low current |
| High strength shell material |
| text something to introduce yourself! |
Introduction
Model | MOT-P75-170 ESC | ||
| MOT-P75-290 ESC | |||
| Length | 128mm | Diameter | 101mm |
| Weight | 480g | Propeller diameter | 75mm |
| Mounting holes | 4xM3 | Cable length | ＞80cm |
| Cable diameter | 6.3mm | Voltage supply range | P75-170:9-25.2V |
| ESC Max current | 35A | P75-290:9-16.8V | |
| Wire Sequence | Red:+ Black:- Yellow:S | PWM input range | 1100-1500-1900US |
Due to the limitation of the heat dissipation power of the built-in ESC, the thrust and power of the built-in ESC version of P75 are slightly lower than that of following list. If necessary, please use the external ESC for P75 thruster to achieve the desired power.
Front view
Side view
Rear view
Parameters
| The MOT-P75-290 without weed fence | ||||
| Reverse | Forward | |||
| Voltage | Maximum Current | Thrust | Maximum Current | Thrust |
| 10V | 8.3A | 2.4KG | 9.2A | 2.9KG |
| 12V | 10.5A | 3.0KG | 11.7A | 3.6KG |
| 14V | 12.7A | 3.8KG | 14.6A | 4.6KG |
| 16V | 15.2A | 4.5KG | 17.3A | 5.4KG |
With weed guard, the thrust will be down by nearly half and the current will be slightly increased.
With a single weed guard, the thrust is reduced by about 1/4.
| MOT-P75-170 without weed fence | ||||
| Reverse | Forward | |||
| Voltage | Max Currrent | Thrust | Max Currrent | Thrust |
| 10V | 2.5A | 1.1kg | 3.0A | 1.4kg |
| 12V | 3.3A | 1.6kg | 3.8A | 1.9kg |
| 14V | 4.8A | 2.1kg | 5.5A | 2.6kg |
| 16V | 5.2A | 2.6kg | 6.2A | 3.2kg |
| 18V | 6.2A | 3.0kg | 7.2A | 3.7kg |
| 20V | 7.1A | 3.5kg | 8.7A | 4.4kg |
| 22V | 8.3A | 4.1kg | 9.9A | 5.1kg |
| 24V | 9.5A | 4.7kg | 11.0A | 5.8kg |
| 26V | 11.0A | 5.5kg | 12.0A | 6.5kg |
With weed guard, the thrust will be down by nearly half and the current will be slightly increased.
With a single weed guard, the thrust is reduced by about 1/4.
Comparison with T200 (The main competitor of this product is T200 propeller, so the comparison chart is made)
| P75 VS T200 | ||
| P75 | T200 | |
| Customazitional | rotating speed can be customized with different voltage and model | single type string uncustomizable |
| Bearing | specialized for seawater it can Rotate in the air it sounds good | plastic material It can not Rotate in the air It sound harsh |
| Thruster current | 11A 5.8kg 24V（170） 11.7A 3.6kg 12V （290） | 25A 5kg Max 16.8V 16.7A 3.7kg 12V |
| Dimension | same installation dimensions, similar volumes, interchangeable | |
| Disassembling method | quickly disassemble tail and propellers Not need to disassemble the entire propeller | the entire propeller needs to be removed for maintenance |
| Files | 3D drawings | 3D drawings |
| Outlet | watertight connectors optional | outlet directly |
Dimension
Using Display
